Project Description
Dry distillation section for refractory cross partition, dry ash discharge The advantages of this kind of furnace type: absorbs the advantages of the first generation and the third generation of furnace type, the wet ash discharge basin structure change to the structure the dry ash discharge without water seal bird-bath, due to remove the water seal, blast furnace bottom pres-sure is not res-tricted by water seal height (wet ash discharge of water seal hei-ght is 8000-10000 MM, so the blast furnace bottom pressure must not exceed 7000 pa.), Up to 10000 pa, so, more to improve gas production, can reach 7500-8000 m³ /h.
Combining the advantages of the third type furnace, carbonization effect is good, the period of the gas does not contain tar, purification equipment blocking phenomenon will not occur Disadvantages: due to dry ash discharge, gas stove to build on a layer of platform, increase
a layer of gas station, increased by about 3 meters high, increased investment in infrastructure.
Main parameters and technical performance
Name |
Value |
Unit |
Name |
Value |
Unit |
||
Furnace | Diameter | Ф4300 | imm | Fuel | Coal | Bituminous coal, GB9143-88 |
|
Cross sectional area |
14.51 | m² | Granularity | 13-25,25-50 | mm | ||
Water jacket |
Heating area |
44 | m² | Consumption | 3880-4680 | Kg/h | |
Working pressure |
0.05 | Mpa | Gas production | 12000-14000 | Nm³/h | ||
Gas outlet diameter | Ф 1100 | imm | Gas heating value | 5.44-5.86 | MJ/N M³ | ||
Air inlet diameter | Ф630 | mm | Air seal steam pressure |
34.3 x 10⁴ | Pa | ||
Maximum blast pressure |
10000 | Pa | Saturation temperature |
50-65 | ℃ | ||
Air requirement | 2.8 | Nm³/kg coal | Water quality requirement of water jacket and air collecto |
Suspended matter |
≤2 | mg/L | |
Rotational speed of ash tray |
0.121-1.207 | r/h | Total hardness |
≤2.1 | me/L | ||
Coal feeding system Motor |
3.0 | Kw | PH value (25℃) | ≥ 6.5-9.5 | |||
Transmission motor | 18.5 | Kw |