Project Description
Dry distillation section as the center of stainless steel tube, wet ash discharge The advantages of this kind of furnace type: In the center of the dry distillation section increases the stainless steel tube, increase the gas production, improve the dry distillation section of carbonization effect and gas production can reach 5500-6000 m³ /h
Main parameters and technical performance
Name |
Value |
Unit |
Name |
Value |
Unit |
||
Furnace | Diameter | Ф 3600 | imm | Fuel | Coal | Bituminous coal,GB9143-88 | |
Cross sectional area |
10.18 | m² | Granularity | 13-25,25-50 | mm | ||
Water jacket |
Heating area |
36 | m² | Consumption | 2600-3250 | Kg/h | |
Working pressure |
0.05 | Mpa | Gas production | 8000-10000 | Nm³/h | ||
Gas outlet diameter | Ф800 | mm | Gas heating value | 5.44-5.86 | MJ/N M³ | ||
Air inlet diameter | Ф520 | mm | Air seal steam pressure |
34.3 x 10⁴ | Pa | ||
Maximum blast pressure |
8000 | Pa | Saturation temperature |
50-65 | °C | ||
Air requirement | 2.8 | Nm³/kg 煤 | Water quality requirement of water jacket and air collecto |
Suspended matter |
≤2 | mg/L | |
Rotational speed of ash tray |
0.121-1.207 | r/h | Total hardness |
≤2.1 | me/L | ||
Coal feeding system Motor |
2.2 | Kw | PH value (25℃) | ≥ 6.5-9.5 | |||
Transmission motor | 11 | Kw |